Just as you wouldn’t expect to fit everything from a 30 Litre rucksack into a 5 Litre enduro bumbag, you need to be equally as selective with what you carry in your holdfast tool wrap. You’ll soon find your ideal setup after a few minutes trying different combinations. Here is some inspiration on what you might carry:
Peaty's HoldFast Trail Tool Wrap
Peaty's HoldFast Trail Tool Wrap
Regular price
Dhs. 165.00
Regular price
Sale price
Dhs. 165.00
Unit price
per
Tax included.
Out of stock
Couldn't load pickup availability
DESCRIPTION
Key Product Features
Our Holdfast Trail Tool Wrap is the ultimate flexible storage solution, designed to flexibly carry your trail essentials on any bike while keeping them clean and giving fast access in trailside emergencies.
Traditional frame wraps move around, scratch your frame, get your tools dirty and take ages to fit and remove.
Our holdfast trail tool wrap is made from a super durable, fully waterproof fabric, with welded seams, to stop your tools being covered in mud or dust - even on the filthiest of rides. There’s even a fully water-sealed internal stash pocket to keep those small parts and valuables safe & dry.
Our unique mounting system separates the wrap from the strap, allowing the strap to be tightly cinched around your frame to create the most grip possible. The tool wrap then attaches separately to the mounting strap, making your tools rapidly accessible when needed.
Once removed and open, the wrap can also be temporarily hung off your bike by sticking it back onto the strap (which is left attached to your frame) giving you quick hands-free trailside access to all of your essential tools.
Our flexible mounting system allows you to mount your strap anywhere, on any bike without the restriction of water bottle or accessory mount locations. This gives you flexibility as to what you want to carry, giving enough room for a tube and a wrap full of trail essentials that can also be thrown in a backpack for bigger days out.
STRAP IT ON
We knew one of the biggest criticisms of existing straps on the market is the lack of grip to the frame - leading them to move around and even scratch your frame. The key problem to solve with our wrap would be to make it grip to your frame stronger than peaty grips a freshly poured pint.
The big step in solving the problem was separating the wrap from the strap. Where existing straps on the market have relatively small contact areas (because the strap is joined to the bag or wrap), separating the strap meant it could be wrapped fully around the frame 360°. Cinched tightly back onto itself with a large sticky rubber pad contacting the frame, we’ve not yet had a wrap move on a ride!
TO TUBE OR NOT TO TUBE?
Having the strap separated from the wrap also means an innertube can be simply slotted underneath the strap before cinching down tight.
This means the tube is still held solid even when the wrap is removed - so you don’t have to remove the tube every time you want to access your tools.
The innertube isn’t an integral part of the system either, like it can be with most frame straps, so if you then need to use the tube in an emergency then the strap simply cinches down to the frame again and everything still works perfectly - with or without a tube.
SIZE MATTERS
By far the biggest challenge we had in designing the wrap was optimising the pocket size. When we made the pocket wider, the wrap started to look like a droopy baguette strapped to the top tube, and was too long to fit in most frame openings. When we made the pocket deeper, it was too easy to over-fill the wrap, which meant it stuck out from the width of the top tube and could rub on your knees.
After a lot of prototyping and testing, we found an ideal width and depth for the wrap pocket which fits a wide combination of trail essentials whilst still rolling up nicely and not being too bulky on the bike.
WHAT CAN IT HOLD
FITTING INSTRUCTION
- Pack your essential items into the pouch of your wrap. Give the pocket a squeeze to help everything settle into place and make the wrap easier to roll.
- Roll your wrap tightly and check to see it fits in the area of your frame that you’d most like to store it. We suggest underneath the top tube, but you may find a better place for you depending on your particular frame size or suspension layout.
- Clean and dry the area you want to attach the wrap to.
- Take your strap, place the grippy rubber patch onto your frame and feed the strap through the buckle.
- (optional) if you want to carry an innertube, place the folded tube between the strap and frame at this point.
- Pull the strap tight then cinch it back on itself tightly so the velcro sticks to itself. The strap (and tube if added) should now be firmly locked in place around your frame.
- Now, take your wrap and stick it to the underside of the strap.
- Firmly pull the strap around the wrap and stick the strap onto itself to secure everything in place firmly. Now get out and ride!
WARRANTY
12 Month Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements: Warranty valid from the date of purchase. To submit a warranty claim, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to the use of crash, abuse, alteration, modification, or any used in any way not intended as described in this instruction manual.
Please contact your Peaty’s dealer with any questions.
